- RS品番:
- 176-4188
- メーカー型番:
- 97 53 18
- メーカー/ブランド名:
- Knipex
- RS品番:
- 176-4188
- メーカー型番:
- 97 53 18
- メーカー/ブランド名:
- Knipex
データシート
その他
未対応
- COO(原産国):
- DE
詳細情報
0.08 → 16 mm2のワイヤエンドフェルール用の自動圧着プライヤ、360 °回転ヘッド付き
エンドスリーブ用のKnipex 16シリーズケーブル圧着器は、角型圧着プロファイルと高いケーブル圧着能力を備えています。360 °回転圧着ダイを備え、8つのタッチロックポジションを備え、高い圧着品質を実現しています。自己調整機能を備えているため、誤った圧着ダイや設定による圧着エラーのリスクはありません。
特長と利点
- 360° rotating crimping head with 8 engagement positions
- Square crimp profile, crimping range
- Crimping of wire end ferrules possible in almost any working position
- Crimping tool automatically adjusts to the individual sections
- Crimp opening accessible from both sides, end sleeves can be moved
- Crimping of twin end sleeves up to 2 x 6 mm² is possible
- Crimp quality is always high thanks to the forced locking (can be unlocked)
- Lightweight and handy tool, hand force reduced by lever mechanisms
- Compact design
- Ergonomic handles
- Slim head for ideal accessibility
- Capacities mm² / AWG : from 0.14 to 16 mm², AWG from 28 to 5
- Material: special grade chrome vanadium electric steel, oil-hardened
- Square crimp profile, crimping range
- Crimping of wire end ferrules possible in almost any working position
- Crimping tool automatically adjusts to the individual sections
- Crimp opening accessible from both sides, end sleeves can be moved
- Crimping of twin end sleeves up to 2 x 6 mm² is possible
- Crimp quality is always high thanks to the forced locking (can be unlocked)
- Lightweight and handy tool, hand force reduced by lever mechanisms
- Compact design
- Ergonomic handles
- Slim head for ideal accessibility
- Capacities mm² / AWG : from 0.14 to 16 mm², AWG from 28 to 5
- Material: special grade chrome vanadium electric steel, oil-hardened
典型的な応用
圧着プライヤは、さまざまな用途で使用できます。
- メンテナンス及び修理
- 電気設備
- 圧着工場
- メンテナンス及び修理
- 電気設備
- 圧着工場
製品メンテナンス
- 適切な動作と長寿命を維持するために、シャフト及びその他の可動部品を定期的に潤滑する必要があります。
- 工具が汚れやその他の汚染物質に晒されている場合は、少なくとも10,000サイクルごとに潤滑*を推奨します。
- 圧着ダイ範囲の設定も確認する必要があります。- 工具のプリロードが大幅に減少すると、圧力設定ピンの調整が必要になります。
*軽量の非鉱物オイルを使用
- 工具が汚れやその他の汚染物質に晒されている場合は、少なくとも10,000サイクルごとに潤滑*を推奨します。
- 圧着ダイ範囲の設定も確認する必要があります。- 工具のプリロードが大幅に減少すると、圧力設定ピンの調整が必要になります。
*軽量の非鉱物オイルを使用
仕様
特性 | |
---|---|
全体長さ | 200 mm |