Wago PLC I/Oモジュール 750-459 PLC I/Oモジュール 750シリーズ用

Link extra sensors into your control system with this PLC I/O module from Wago. As it converts analogue signals into data, the block carries measurements straight to a controller for hassle-free monitoring. A conversion time of just 10ms means the device handles readings in a flash to keep information moving through your setup. You can use the unit with everyday sensors as it uses industry-standard signals of 4 to 20mA. Thanks to the module's 12-bit resolution, it sends out detailed specs for reliable data transmission.

• Secure spring clamp terminals for quick and tool-free wire connections
• Measurement error of just ±0.1%, ensuring accurate readings
• Isolated inputs to minimise the risk of electrical hazards
• Four inputs let you connect multiple sensors at once
• Hardwearing PC and PA housing stands up to impact and wear

• Process control
• Fluid management systems
• Metalworking

In addition to 4 to 20mA signals, this block also works with 0 to 20mA analogue signals, so it's a versatile choice for many sensor connections.