- RS品番:
- 266-0288
- メーカー/ブランド名:
- RS PRO
- RS品番:
- 266-0288
- メーカー/ブランド名:
- RS PRO
その他
- COO(原産国):
- TW
詳細情報
RS PROフランス式カラーコードブーツレースフェルールキット(圧着工具付き)
RS PROが提供する便利な圧着端子キットです。高品質なフランス式カラーコードで色分けされた各種サイズの絶縁ブーツレースフェルール(別名: コードエンドフェルール又はワイヤエンドフェルール)が含まれます。これらのワイヤフェルールは、5 mm²~10 mm²のサイズで、ボックスにコンパートメントごとに分けて収納されているので、簡単に選ぶことができます。専用のコンパートメントに圧着工具も収納されています。このキットは携帯可能なので、導体を終端する際に作業場所に関係なく必要なすべての端子サイズを持ち運ぶことができます。
ブーツレースフェルールとは
ブーツレスフェルールとは、プラスチック製の色分けされた成形絶縁カラー付きの金属製チューブ又はフェルールのことです。フェルールは、より線ワイヤ又はケーブルの端に被せて圧着してから、ねじ又はスプリングクランプ接続に挿入します。
ブーツレースフェルールを使用する場面
より線ワイヤの端の被覆を剥いて、ねじ端子に直接取り付けると、ねじの圧力でより線が自然に広がります。外れてしまうより線もあります。この場合、電気接続の品質が低下し、短絡が発生する原因にもなります。棒状圧着端子を使用すると、フレア型の絶縁ファンネルがすべてのより線を捉えます。これらのより線は、フェルールチューブ内でまとめて圧着されます。圧着されたフェルールを端子に挿入して、電気接続を確立します
特長と利点
絶縁体がフランス式カラーコードで色分けされているため、フェルールサイズの識別が簡単
優れた電気接続
圧着した端子は、ワイヤの端を劣化させることなく、接続部から繰り返し挿抜可能
きれいに収納可能なポータブルでコンパクトなケース
選択か簡単なサイズ別マーク付きの8つのコンパートメント
透明なプラスチック製カバー
0.75∼10 mm2の圧着端子サイズ用の圧着工具が付属
優れた電気接続
圧着した端子は、ワイヤの端を劣化させることなく、接続部から繰り返し挿抜可能
きれいに収納可能なポータブルでコンパクトなケース
選択か簡単なサイズ別マーク付きの8つのコンパートメント
透明なプラスチック製カバー
0.75∼10 mm2の圧着端子サイズ用の圧着工具が付属
Applications:
Bootlace ferrules are used on multi-stranded wires that are being inserted into screw terminals and terminal blocks. Applications include consumer units, circuit breakers, electrical control panels and any equipment where there is a requirement for a multi-stranded wire connection.
FAQs
How do you Crimp a Bootlace Ferrule?
Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule (insulated collar first) onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool or ferrule crimper, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal.
How do you Crimp a Bootlace Ferrule?
Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule (insulated collar first) onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool or ferrule crimper, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal.
仕様
特性 | |
---|---|
タイプ | フランス式カラーコード |
種類 | ブーツレースフェルール |
キット内容 | 0.5 → 10 mm²ワイヤエンドフェルール及び圧着工具 |
表面処理:コンタクト | 錫 |
コンタクト材質 | 銅 |