- RS品番:
- 648-6955
- メーカー型番:
- 2715966
- メーカー/ブランド名:
- Phoenix Contact
19 海外在庫あり - 通常4営業日でお届け
10 海外在庫あり - 通常5営業日でお届け
追加されました
単価: 購入単位は 個
¥1,125.00
(税抜)
¥1,237.50
(税込)
個 | 単価 |
1 + | ¥1,125.00 |
- RS品番:
- 648-6955
- メーカー型番:
- 2715966
- メーカー/ブランド名:
- Phoenix Contact
その他
- COO(原産国):
- PL
詳細情報
Phoenix Contact マルチレベル Terminal
Phoenix Contact のマルチレベル Terminal Block 製品は、最新の機械制御の合理的な配線を実現します。
Terminal Block は、 DIN EN50 022 準拠のフラット TOP ハットレールに取り付けるように設計されています。
Terminal Block は、 DIN EN50 022 準拠のフラット TOP ハットレールに取り付けるように設計されています。
特長と利点
3 本の導線がすべて 1 Terminal で並列に接続され、 3 本のイニシエータ Terminal がある
TOP レベルでの信号フロー用スルー端子
中間レベルおよび下位レベルでのプラスおよびマイナス接続用のシングルエンド Terminal Location
3 レベルアクチュエータ Terminal との低レベル PE 接続
TOP レベルでの信号フロー用スルー端子
中間レベルおよび下位レベルでのプラスおよびマイナス接続用のシングルエンド Terminal Location
3 レベルアクチュエータ Terminal との低レベル PE 接続
認可
UL、CUL、CSA
Phoenix Contact DIN Rail Terminal Block, 24A Current Rating, 250V Voltage Rating - DIK 1.5 - 2715966
Safely distribute power to your sensor or actuator with this terminal block from Phoenix Contact. It attaches to your DIN rail, so installation is quick and easy. Tighten it with screws in the M3 threaded terminals to keep it fixed in place and resistant to industrial vibration. Once installed, you can wire the block to a power supply and connect it up to your sensor/actuator device to communicate digital information to process controls and other industrial automation applications.
The unit's robust PA housing material protects against impact shock and abrasion damage. It has built-in Category III surge voltage protection so it doesn't need additional surge suppressors to operate safely.
The terminal block has three connection levels parallel to one another for a simplified setup. The through-terminal controls signal flow in the top level, while the middle and lower level take positive and negative connections, with the protective earth connections in the lower level.
The unit's robust PA housing material protects against impact shock and abrasion damage. It has built-in Category III surge voltage protection so it doesn't need additional surge suppressors to operate safely.
The terminal block has three connection levels parallel to one another for a simplified setup. The through-terminal controls signal flow in the top level, while the middle and lower level take positive and negative connections, with the protective earth connections in the lower level.
• Flame-retardant behaviour stops vertical burning within 60 seconds to maximise safety
• Accepts wire sizes between 24 and 12 AWG for versatile installation options
• 24A current rating for compatibility with mid-level data transferral
• Maximum tightening torque of 0.6Nm to keep the fitting secure
• Accepts wire sizes between 24 and 12 AWG for versatile installation options
• 24A current rating for compatibility with mid-level data transferral
• Maximum tightening torque of 0.6Nm to keep the fitting secure
仕様
特性 | |
---|---|
色 | グレー |
レベル数 | トリプル |
AWGサイズ | 24 → 12AWG |
シリーズ | DIK 1.5 |
結線方法 | スクリュー |
ケーブルCSA | 2.5mm² |
定格電圧 | 250 V |
定格電流 | 24A |
基準適合 | CSA |
モデル番号 | DIK 1,5 |
関連ページ
- Phoenix Contact ヒューズ無しDINレール端子 スクリュー DOK 1.5シリーズ 2717016
- Phoenix Contact ヒューズ無しDINレール端子 スクリュー UKH 50シリーズ 3247402
- Phoenix Contact ヒューズ無しDINレール端子 スクリュー UKH 50シリーズ 3009080
- Phoenix Contact ヒューズ無しDINレール端子 スクリュー UKH 95シリーズ 3247420
- RS PRO ヒューズ無しDINレール端子 スクリュー, 100A
- Phoenix Contact ヒューズ無しDINレール端子 スクリュー DIKD 1.5シリーズ 2715092
- Phoenix Contact ヒューズ無しDINレール端子 スクリュー UKH 150シリーズ 3010123
- Phoenix Contact ヒューズ無しDINレール端子 スクリュー DIKD 1.5-PV BUシリーズ 2715584