Phoenix Contact ソリッドステートリレー DINレール, 2964283

Controlling your circuits is a breeze with this solid state relay from Phoenix Contact. When supplied with 24V DC, it makes or breaks a connected circuit of 4 to 30V DC in a jiffy. The unit contains no moving parts, which eliminates the risk of wear and tear to ensure a long service life. A 2.5kV AC test voltage rating means it also holds its own against sudden electrical surges.
This versatile terminal block accepts wires in a broad cross-section range between 0.2 and 2.5mm², including rigid and flexible conductors. Measuring just 6.2 (W) x 80 (H) x 56mm (D), it's a compact choice that fits into tight mounting areas. SSMs like this have many uses – you'll find them everywhere from medical equipment and multiplexers to I/O subsystems.

• Low current rating of 6mA means it saves energy
• Built-in LED indicator so you can easily monitor operating voltage
• Mountable on a DIN rail in any position for added flexibility
• IEC 60947-5-1 compliance shows it meets the design requirements for control-circuit devices and switching elements internationally
• Performs in temperatures between -20°C and +60°C, so it's suitable for use in challenging environments

ブランド・メーカー：フエニックス・コンタクト / Phoenix Contact

Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavourable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.